 ****************************************************************
 4ORMULATOR VOCODER EXTREME BASIC EDITION VER.3.5
 ****************************************************************
 *** For VST Hosts ***
****************************************************************
 
 The following two files should be present:

 4ormulator.dll     ----- The plug-in
 README.TXT         ----- This file
                         



>>> INSTALL 

 To install this plug-in program, place the file 4ormulator.dll
 into your VST plug-ins directory.
 


>>> OPERATION 

 When the plug-in is loaded by your host, the main window for the 
 plug-in will open with several controls.  Use the slider controls
 to adjust:

	VOLUME - Mix volume
	WET    - Effect volume
	DRY    - Dry volume
	PITCH  - Transpose the frequency of the effects
	FINE   - Fine tune transpose frequency
	GLIDE  - Glide time for frequency changes

 Use the round selector control to select one of the 32 different
 effects.



>>> USAGE INFO

 This is a highly reactive transform.  The spectral content
 of your source signal(s) will usually determine what will occur.

 Special consideration is required to use the GLIDE control.
 The GLIDE control has a very wide range.  When it is turned
 up to maximum the glide rate is very very slow.  When it is
 set about midway, the glide rade is about one second.  When
 switching between the 32 different effects (or when adjusting 
 the PITCH controls), the GLIDE control will cause the 
 frequencies to glide (portamento) between different effect 
 settings.

 Clicks and Pops:  When switching between the 32 effects, there 
 may be a click or pop.  This is determined by the various modes
 each effect can have such as the SOURCE selection buttons.
 When switching between effects that have different mode 
 settings, a glitch may occur.  When switching between effects 
 that have similar or identical mode settings, a glitch will not 
 occur.  The GLIDE control works best in the latter case. With 
 careful usage, clicks and pops can be avoided.

 Use the red indicator in the upper left corner of the window
 to determine if  the signal  is overloading or clipping.


>>> REGISTER 

 A Registered Edition of this plug-in is also available - featuring
 the latest version of this plug-in with a library of 200+ effects,
 full effect editing, full support for user presets, and a detailed
 User Guide.  To find out more, visit:

		>>> WWW.VOCODER-PLUGINS.COM <<<



>>> SYSTEM REQUIREMENTS & PLUG-IN SPECIFICATIONS

	500 MHz or better system. 1 GHz + recommended. 
	
 Results will vary according to your system and sound card
 performance. NOTE: With insufficient CPU overhead your host 
 may lockup or act buggy. Each 'effect' requires different amounts 
 of CPU time... so if your system is marginal you will find that 
 some effects work and others may have 'drop out' clicks etc..

 

>>> UN-INSTALL 

 To un-install this plug-in program, just delete the file
 4ormulator.dll 



>>> PROBLEMS?

 Due to the variety of plug-in hosts, please describe
 your host system when reporting problems. Include as
 much detail as you can -- Windows version, host program 
 you're using (or wrapper), version numbers (host and 
 plug-in), symptoms, etc..

 For the latest information visit: www.vocoder-plugins.com

 Or, If you would just like to comment on anything, please 
 let us know at: 

                help@vocoder-plugins.com



>>> LEGAL 

 This program is provided "as is" and no representation 
 regarding it is made or implied. The entire 4ormulator
 software package is Copyrighted (c) 2002-2004 Richard Wolton. 

 This Basic Edition is provided free of cost so that you may 
 evaluate the plug-in with your host(s) prior to purchase. 
 Due to the large number of different host programs that 
 feature plug-in hosting and the myriad of computer systems 
 they live in, results may vary.


 4ORMULATOR and VOCODER EXTREME 
 are trademarks of Richard Wolton. 

